Are you building a homemade polyfim greenhouse, but are unsure about how to ventilate it? Here are a couple of solutions for you. You can see that this greenhouse has roll up sides, an option which is readily available, but can be costly. We have 2 options available that insert directly into your polyfilm covering without any additional framing. They use the channel base and wiggle wire to insert directly into the greenhouse covering. You simply cut the film and install these accessories directly into the film covering without any additional framing.
Intake Shutter with Solar Powered Opener
The first option is a solar powered greenhouse shutter. This has louvers and a wax cylinder powered opener. It will open when it is warm and close when it is cool automatically. They are available in 6 different sizes. If you would like to use this on another type of greenhouse such as polycarbonate, we can remove the base channel and you can insert this directly into a wood framed opening.
Solar Powered Roof Vent
The second way to do this is with a solar powered roof vent. This is a lightweight polycarbonate vent. It weighs less than 10 pounds, but you get all of the benefits of the durable polycarbonate covering. It also has the was cylinder powered opener that will automatically open and shut the vent as the temperature requires. To install this you simply cut the polyfilm and install it directly into the greenhouse covering.
A lot of people prefer to build their own greenhouses rather than purchase a kit. With these 2 ventilation options, there is no reason not to build your own polyfilm greenhouse.
If you are in the process of designing or purchasing a greenhouse you probably have questions about what accessories you should purchase with the greenhouse. I get asked this a lot. Some people want to completely ignore the accessories, while others have read every article and believe they should buy everything that you can put in a greenhouse. My recommendation is to start with the ventilation package. Yes, you will need it even if you are only overwintering plants and even if you are in a cold location. I have seen sunny winter days when it was 60 degrees outside and my fan and shutters were operating. And, I keep my ventilation system set at 90 degrees. On the other hand, I hate to see people load up on a lot of items that they will never use. A heater is a good idea, if it is close to the time of year you will need it, or if any modifications to the structure are needed to accommodate for vents, etc. I think the rest of the items should be added as needed.
Here is a nice article from our friends at Garden and Greenhouse which talks about some small hand tools and re purposed items. These are things probably most of us would never think about, but will be used over and over again.
If you already have or are thinking about getting a greenhouse you should consider purchasing several inexpensive tools and related products. Although the items are not very expensive they can make a difference in how much you enjoy greenhouse gardening and how efficient you are at doing it.
I know it is hard to image this. We are under a heat advisory today in Louisiana. But, now is the time to start preparing your greenhouse for winter. Really, I am serious. You should be doing a check for all of your systems and tightening up for the cold winter months ahead. This is a really good article covering what systems you should be looking after. Even though this was written for commercial greenhouse growers, most of the aspects still apply to the backyard greenhouse grower. Although, I am not sure that there are that many of us that have a back up generator on our home greenhouse.
Advance Greenhouses participates in affiliate programs, which means we may receive commissions if you purchased an item via links on this page to retailer sites. This is at no additional cost to you. Our editorial content is not influenced by commissions. As an Amazon Associate I earn from qualifying purchases. Read more about what we do.