What’s All The Hype About Hypertufa?
What’s all the hype about hypertufa?
Have you been seeing “hypertufa” a lot lately? Are you unsure of what it really is? Would you like to learn how to make your own hypertufa projects? Then read on.
We make a commission through sales if you click on affiliate links in this post.
What is hypertufa?
Hypertufa is an excellent diy project. It is a long lasting and beautiful substitute for tufa. Next question – what in the world is tufa? It is a natural volcanic rock. Making hypertufa is the art of making decorative or functional garden items from a blend of cement, peat moss (coir can be substituted under certain circumstance), sand, perlite or vermiculite, and water. There are about as many hypertufa formulas as there are hypertufa crafters. You can vary your recipe and the amount of each ingredient added to meet the needs of your project.
Why not? It is an excellent substitute for heavier concrete planters. It is lightweight, it can be hand molded, sculpted, carved, and you can add decorative mosaic pieces or color to it. It is long lasting and will not freeze if it is cured properly. When the peat moss breaks down or decomposes it will leave pits and crevices making a natural looking pot. It is a porous material that is conducive to plant growth. Plus, the fact that your creative juices can flow and you can make a truly one of a kind, this is my creation, piece is just the topping on the cake. A small beginners project would be an excellent start to a child’s journey into hypertufa. They will love it. It has been compared to making mud pies! Don’t forget to wear old clothes.
What can I make?
You can make just about anything you can imagine. To name a few you can make spheres, steeping stones, birdbaths, planters, trough planters, garden art, hypertufa leaves, stepping stones, garden lanterns, birdbaths, etc. I am sure you can think of a few more projects.
What tools do I need?
You can probably scavenge most of the tools you need from your household items. You need mixing utensils (gloved hands work well for this) , a mixing container (maybe a wheelbarrow or smaller depending on your project), and molds. Some examples of molds are dish pans, oil pans, boxes, boxes you make, just about anything you can think of.
Can I find all of the materials locally?
You should be able to locate all of the materials that you need to do a hypertufa project. Portland cement is readily available at the big box stores. Please note: this is not concrete. It is an ingredient in concrete. Portland cement comes in white or gray. You will use the white when you are adding color or if you want a granite look. The gray will be used for all other projects. You should also be able to source all of the other items at big box stores or at local nurseries. We prefer to support the local nurseries whenever we can.
What formula is the best for my project?
Some of this will depend on how you are going to form your final art. If you are a beginner you are going to use the simplest and easiest to work with formula available. No need to burn yourself out with a tough project the first time. Do something small and attainable. Master this and then move on to your next formula. There are formulas that give added strength, that have wire mesh for even more strength, that will make the material easy to carve, that will make the material lighter weight, etc.
What is the most important part of this project?
Well, I would have to say that the artistic decisions are the most important part, but in all actuality it is the curing. A properly cured project will last for years through harsh environments. An improperly cured project may fail before you expect it to. Of course some of this is like gardening. There are “hard, fast” rules that we all have to follow. Then there are the “wonder what will happen if I try this” moments. Not all gardens in all areas grow in the same manner. I have even read about microenvironments where the conditions vary from neighbor to neighbor. But, you will reach a point when you know the proper feel to cured hypertufa. The secret is to cure it slowly in a moist environment. The first part of curing is done in a plastic bag for 2 – 4 days. You will not be able to scratch the surface of the tufa. At that point you can unmold it. You will leave it in the bag unmolded up to a month or more. The project is completed when it sounds hollow when tapped. The final step is leaching out the lime that could be hazardous to your plants. A simple method is to soak it in fresh water (that is changed every day) for 3 days. Next step, planting in your vessel or placing your garden art in the appropriate place.
Looking for extra income?
Hypertufa planters, garden art, etc are in high demand. This is due to the many beautiful configurations that are designed and made. Also, don’t forget the lightweight, durable, and porous attributes that make this a much desired item. They sell great at yard sales, garden shows, flea markets, etc. This is a great way to get your children involved in creation and the art of making money as well.
OK, did I entice you?
Hopefully by this point you are thinking, I have a great spot for a hypertufa sphere. Want to learn how to do this? Check out this thorough informational book. Everything you need to know for a successful project is covered in this 100 page book.
Tammy is a Diamond Ezines author and a 2018 Quora Top Writer. She loves gardening, writing about gardening, and sharing her gardening experiences with anyone who is willing to listen!